Laboratory modified bitumen plant (UVB-2 L)

УВБ-2-Л

UVB-2-L bitumen modification laboratory system is designed for preparation of small samples (no more than 10 liters per batch) of modified bitumen. The system uses continuous bitumen mixing process with further dispersion of bitumen and polymer in the mill. Unit design allows for addition of other liquid components in the process of bitumen modification.

The unit operates on the principle of inline mixing with simultaneous dispersion of bitumen and polymer (in a mill). The design also allows addition of liquid components.

Such equipment is used mostly in petrochemical facilities for perfection of the modified bitumen production process to determine the required amount of modifier by using a sample of the product for laboratory analysis.

The temperature of bitumen is controlled automatically. It is equipped with a computer control panel for convenience of operation.

Specifications Value
Main load vessel volume, liters 24
Minimum bitumen load in vessel, liters 10
Maximum bitumen load in vessel, liters 12
Modified bitumen preparation process Dispersion of bitumen and polymer in mill
Pump capacity, l/min 30
Max temperature of bitumen preparation, °C 190
Minimum bitumen input temperature, °C 160
Heating of liquid in the tank and pipelines By heat carrier
Heater power, kW 4.8
Controls Manual
Component controls Automation assisted
Max power consumption, kW 15
Dimensions (L/W/H), mm 1630/770/1800
Max weight, kg 420

обновлено: July 7, 2016 автором: Antonia Globecore